Choice per:
  Products A-Z
  Painting Substrates
  Painting Techniques
international
Product Information:

 

 
Tips & Ideas
Marabu-3D Stencils
Designing in the third dimension.

For elegant relief effects on walls, furniture, canvases etc., we recommend the PVC-free Marabu 3D Stencils in a thickness of 0.5 mm. The transparent polyester allows you to see through when working and is durable and robust.
The motifs developed in the Marabu studio can be used as borders and can be reversed. All paste-like Marabu Products (except Acryl Gel Pearls) are ideal for combining with Marabu-3D Stencils.

Here’s how it’s done:

For this you will need
• Paint from Marabu
• Marabu-Painting Knife
• Marabu-Adhesive Spray
• Adhesive tape

  1. The painting substrate must be clean, grease-free and dry.
  2. Spray stencil with Marabu-Adhesive Spray (spray from
    30 cm distance), allow to flash off, place it in the chosen position and firmly press. Fix with adhesive tape as well if necessary, if you work on a wall.
  3. Take up an appropriate quantity of the gel or paste and go over the motif evenly using a paint knife.
  4. Carefully remove 3D stencil and clean with cold water immediately.

3D Stencil motifs
Example of use
 
zoom  
 


 
Tips & Ideas
Marabu-Adhesive Spray 
Simplifies stencilling and provides exact outlines

Marabu-Adhesive Spray in the easy to handle spray can makes stencilling easier. Avoid annoying slipping of stencils and imprecise outlines.
As the entire surface of the stencil can be held in place, the colourless adhesive spray provides exact outlines and a perfect result.
The spray is ideal for multiple fixing and removing of stencils from the painting surface leaving no residues. The slogan for Adhesive Spray is „small but powerful” confirmed by its high yield and simple application among other things.

Here’s how it’s done:

  1. Shake can thoroughly before spraying (approx. 2-3 min.). Spray from approx. 30 cm distance / application temperature approx. 20°C.
  2. Spray stencil with Marabu-Adhesive Spray, allow to flash off, place it in the chosen position and firmly press onto the painting surface.
  3. The sprayed stencil can be cleaned with cold water with very little effort and is ready for realising the next creative idea.
  4. After use always turn can upside down and spray until the valve is empty (until only gas escapes from it) so that the valve will not be clogged.


Art.No.
2301 76 000 can 36 ml