Marabu farblose Sprühlacke
  Choice per::
  Products A-Z
  Painting Substrates
  Painting Techniques
international Product Information:
 

 

   

Tips & Ideas

 
 
 
 

Colourless Marabu-Spray Varnishes
Marabu-Fixative
The fine, crystal clear protective film spray for graphic and art work for chalk, pastel, crayon, charcoal, pencil, graphite, watercolour and gouache work. Suitable for use on paper, cardboard, wood, metal. Smudge-proof, does not yellow. Not suitable for use on polystyrene. Contains no CFCs.

Art.No.
 
2201 06 000 can 150 ml
2201 18 000 can 400 ml
 
 

Marabu-Klarlack
Colourless, high-gloss varnish spray dries crystal-clear and provides a wipe-proof and weatherproof finish. A high gloss is achieved with two coats. Suitable for paper, board, cardboard, photographs, metal, wood, glass and many other substrates. Not suitable for use on polystyrene. Contains no CFCs.


Art.No.
 
2202 06 000 can 150 ml
2202 18 000 can 400 ml
 


Marabu-Mattlack
This colourless, matt varnish spray is wipe-proof, weatherproof and suitable for spraying paper, board, cardboard, photographs, wood, metal, glass and many other substrates. Suitable for use on polystyrene. Contains no CFCs.

Art.No.

2303 06 000 can 150 ml
2303 18 000 can 400 ml
 


Marabu-Satin matt varnish
Colourless, satin-matt varnish spray, wipe-proof and weatherproof for spraying paper, board, cardboard, photographs, wood, metal, glass and many other substrates. Suitable for use on polystyrene. Contains no CFCs.

Art.No.
 

2304 06 000 can 150 ml
2304 18 000 can 400 ml
 
 


Marabu-UV-Screen, matt/gloss
Transparent, protective film spray protects against UV effects. Marabu-UV-screen temporarily absorbs UV radiation and inhibits fast yellowing and substrate degradation by its filtering effect. Suitable for use on polystyrene. Contains no CFCs.


Art.No.
 

2308 18 000 can 400 ml, matt
2309 18 000 can 400 ml, gloss
 
 

Marabu-Fix-it
The colourless adhesive spray for multiple fixing and removing of stencils made of paper, cardboard, plastic, etc. and for fixing of textiles when fabric printing – stencils or textiles are prevented from slipping. Spray Marabu-Fix-it on the stencil or the painting support (e.g. cardboard), allow to dry, then mount. Clean sprayed stencils with cold water. Do not spray Marabu-Fix-it directly on the fabric. Contains no CFCs.

Art.No.
2301 06 000 can 150 ml
 

Working Guidelines:
Shake can thoroughly before spraying. Spray from 30 cm distance / application temperature 20 °C. After use always turn can upside down and spray until the valve is empty (until only gas escapes from it) so that the valve will not be clogged.

Advice:
Marabu-spray varnishes are produced on an organic solvent base and are therefore not suitable for lacquering oil colours or solvent-based paints. Marabu-spray varnishes contain no CFCs.