Marabu Artist Spray Paint

Pre-treatment:
All surfaces must be clean, dry and free of rust and grease. If necessary sand the substrate first.

Preparation:
Shake can until you can hear the mixing ball. Then shake can thoroughly for another 2 minutes. Test spray first.

Handling:
Always hold can vertically when spraying.

Spraying Process:
Apply a thin coat first and further applications for full coverage. In doing so allow an interval between each coat.

Spray distance:
Approximately 10-25 cm

Drying:
The dry time depends on ambient temperature and relative humidity. A low relative humidity results in faster drying time, while a high relative humidity results in a longer drying time.

Afterwards:
Once painting is finished turn the can upside down and spray until the valve is empty. Clean the nozzle with a damp cloth to prevent paint from drying on.

Can Artist Spray Paint be combined with other paints?

This paint is flexible in combination with acrylic paint or water so can produce graduated colours provided it has not dried.