Marabu Silhouette Stencil DIN A4

Instructions:

The surface for painting has to be clean, dry and free from grease. Textiles without finishes or fabric conditioner. For especially clear contours, spray the stencil with Marabu Stencil Adhesive Spray (spraying distance approx. 30 cm), leave to dry briefly, position as required and press firmly. Now apply the selected colour by spraying, stippling, rolling or using a paint knife. When picking up paint with the stencilling brush or the paint roller, ensure to dab/roll any excess colour on a neutral surface first. This prevents any excess paint from seeping underneath the stencil. To prevent unwanted colour stains on the painting surface, use a paper towel to dab the watery paints from the stencil before removing. Then carefully lift the stencil and immediately clean with cold water.

You will need:
Marabu paint
Marabu Stencilling Brush, Marabu Foam Roller or Marabu Artist's Knife (for pasty paints)
Marabu Stencil Adhesive Spray

Achieve particularly sharp contours

For particularly sharp contours, fix the stencil to the surface with Marabu Stencil Adhesive Spray.

Mirrorable

Motifs are mirrorable.

Use of motif parts

Motif parts connected with bars can be cut out and used individually.