Marabu Porcelain & Glas Painter 3pc blister assortment “Elegance”

Pumping/activating Porcelain Painter

The ink is highly viscous and contains a lot of pigment. It therefore requires some time until it appears at the tip, so please proceed with patience and care when pumping. Otherwise the paint might spurt from the side of the shaft if the marker was pumped too much. If this happens, wipe the marker or clean it with water: Remove the tip and rinse, dry completely and replace into the shaft, then carefully continue pumping.Accelerating drying

If you are in a hurry, the drying time can be reduced. To do this, let the object dry for approx. 4 hours, place it in a cold oven and set the temperature to 100 °C. When the temperature of 100 °C has been reached, heat the painted object at this temperature for 30 minutes and then let it cool down in the closed oven.Omitting cutting areas and drinking edges

Cutting areas of plates and drinking edges of mugs and glasses should not be painted as cutlery could damage the designs.Effective writing with the calligraphy pen

Always keep the calligraphy tip in the same position while writing to obtain more effective lettering.Closing the caps

Close the cap of the Marabu Painter with a “click” after use.Outlines

Outlines painted with the Porcelain Painter should be left to dry briefly before filling in.Marabu Painter

Please follow these guidelines to enjoy your markers for as long as possible: 1. Never leave the markers open for too long, not even during painting, as this can dry out the tip! 2. Remove any excess paint, always clean the markers and reclose the cap tightly! 3. Always store the markers horizontally.Dishes for everyday use

Glass and porcelain objects have to be cleaned thoroughly before painting. For especially effective cleaning, scrub the object with an abrasive detergent and a sponge and then wipe with Marabu Cleaner or with white spirit to ensure it is free from dust and grease. Before painting, rinse off all detergent residue with plenty of clean water.Fingerprints

When using Porcelain for KIDS, Porcelain Painter and Glas Painter with children please note: Do not touch the cleaned painting surface with your hands. Fingerprints can prevent the paint from adhering properly.Valve system/pump system: Pumping markers

To activate the valve system, shake the marker with the cap in place (the mixing balls have to be clearly audible). Then remove the cap and push down the tip down on a neutral surface a few times until the ink becomes visible. Please note: 1. The thin 0.8 mm tip only has to be pumped twice. 2. Metallic and glitter colours have to be shaken longer as the pigments are heavier. 3. Proceed slowly when pumping the Marabu Painters as too much pumping can lead to excessive discharge of ink.Dried or dirty paint tips

Simply remove dried or dirty pain tips from Deco Painter, Porcelain Painter, Glas Painter, Textil Painter plus or Textil Glitter Painter from the marker and clean them with water. Soak in warm water for a while if necessary. Then

Insufficient adhesion of Porcelain & Glas Painter

Why do Marabu Porcelain & Glas Painter come off even though the objects are only washed up by hand?

The reason for this is often that the surface was not completely free from dust and oil. New objects should be cleaned with a scrubbing agent/dishwashing liquid and a sponge. Do not clean the objects in the dishwasher, as some rinse aids prevent the ink from adhering to the porcelain. Then thoroughly rub the surface with Marabu Cleaner & Thinner or white spirit to remove any finger prints. Any cleaner residue also has to be carefully removed before painting.Adhesion of Porcelain & Glas Painter on Arcopal®

Can I use the Marabu Porcelain & Glas Painter to paint on Arcopal®?

No. Porcelain & Glas Painter does not adhere very well on shatterproof Arcopal.Yield of Porcelain & Glas Painter

Why does the Marabu Porcelain & Glas  Painter stop working after a very short time?

The Porcelain & Glas Painter has a very high yield. The paint tip is often only dried out and can easily be reactivated by lightly moistening them with water. The marker should be closed tightly as soon as possible after use.Combining Porcelain and Porcelain & Glas Painter

Can Marabu Porcelain and Marabu Porcelain & Glas Painter be used together?

Yes. Porcelain and Porcelain & Glas Painter are an ideal combination. Although the Porcelain paint needs no oven fixation, it can be baked along with the Porcelain & Glas painter. Both are dishwasher proof (max. 50 °C) after oven baking at 160°C for 30 minutes.The tip of the Marabu Painter is very long

What could be the reason for the tip of the Marabu Painter sticking our very far?

You have accidentally removed the entire cap. The cap has to be removed carefully.Dried tips on Deco, Porcelain & Glas Painter

How can I clean dried up Painter tips?

The tips can be taken out of the marker and rinsed and cleaned under the tap. Then let the tips dry thoroughly and place them back into the marker. Start pumping and continue painting. Never leave the markers without the cap for too long to prevent them from drying out. The markers should be stored horizontally.Strong paint flow of Porcelain & Glas Painter

What could be the cause for the paint flowing out of the marker and past the tip?

Maybe the marker was pumped too much or the tip has dried up. In both cases you should remove the tip from the marker and clean/rinse it under the tap. Then let the tip dry thoroughly and gently tap the marker without the tip to remove any excess ink. Then replace the tip and pump again.Clothing soiled with Porcelain, Porcelain & Glas Painter

How can I remove the paint from textiles?

Soiled areas should immediately (very important!) be washed out by hand using lukewarm water and soft soap. Stubborn stains can be soaked in a floor cleaner solution (e.g. Cif) and then rinsed. Dried stains can possibly not be removed without residue.Baking the Porcelain & Glas Painter

Can Marabu Porcelain & Glas Painter also be baked?

Yes, it is recommended for dishwasher proof results. After letting it dry for at least 4 hours, place the object in the cold oven and heat to 160°C for 30 minutes. Let it cool down inside the oven after switching it off.

Painting and designing dinnerware

Our porcelain, glass and acrylic paint (Glass Paint/Acrylic Paint/Porcelain & Glass Painter, Porcelain & Glass Painter KIDS) is basically non-toxic and also saliva-proof. Nevertheless, we recommend not to paint drinking rims and cut surfaces of tableware, as the paint is not approved for direct food contact.