Easter serviettes with Marabu Textile Transfer

Who has already taken their place at the beautifully laid Easter table? The little Easter bunnies are eagerly awaiting the guests, who are sure to love these delightful decorations. A laser printer and the Marabu Textile Transfer Medium are all you need to easily transfer any image onto fabric and transform simple serviettes into eye-catching decorations for any Easter table.

Share with friends

Marabu products you need...

…additionaly things you need

plain white linen serviettes

laser printer

scissors

adhesive tape

paper for placing under the fabric

How it is done:

Before painting, wash the serviettes without fabric softener to remove any finish residues. Leave to dry and iron.
Print the desired image on a laser printer and cut it out leaving a border of 1 – 2 cm all the way round.
Use the adhesive tape to secure the design to the fabric with the printed side facing down. Before you continue, place a sheet of paper under the fabric.
Use a flat brush to apply the Textile Transfer Medium to the back of the paper to dissolve the printer ink. Once the paper is completely soaked with the medium, use a corner of the squeegee to transfer the printer ink to the fabric. Take care to work with even pressure.
Remove the paper and leave the serviette to dry. The image can then be sealed by evenly applying Textile Protect to it with a brush. For clean results, only seal the design itself and not the surrounding fabric. Allow to dry again.
Finally, fix in the oven for 8 minutes at 150°C. The serviettes are then machine washable at up to 40°C.