Marabu KiDS Window Color Party Pack

Simple instructions with guaranteed success:
1. Draw the outlines: place the chosen pattern under clear film (PP or PE) and trace the image with outliner straight from the bottle, leave to dry for 1 - 2 hours. Ensure there are no gaps in the outlines.

2. Paint: fill in the outlines right up to the edge. Leave to dry for 24 hours. The colours look milky at first, but dry clear. Immediately wash out spills on fabric using soap and lukewarm water.
3. Peel off: carefully peel off the picture from the film and stick to the chosen surface. The Window Color image can be removed and reapplied somewhere else. Before removing images that have been in place a while, moisten or warm with a hairdryer, so that they become flexible again.

Crackling with Marabu fun & fancy

Amazing crackle effects can be achieved with Marabu Crackle Medium. Apply it to a totally dry fun & fancy motif, crackles will develop during the drying process and will give the motif an antique appearance.

Painting mirrors with Window Color

Mirrors can also be painted with Window Color: Brushing your teeth becomes a voyage of discovery when colourful pictures on the mirror stimulate your imagination. And the large wardrobe mirror becomes a new centre of attraction with a painted tape measure.

Painting with Window Color

You can also use cling film instead painting films. In case something goes wrong, keep some kitchen roll to hand and wash spots of paint off textiles straight away using soap and luke warm water. Air bubbles on the painted surfaces can be easily removed using a toothpick. If the designs have been affixed for a while, damp them with water before removing or warm them up with a hairdryer so they become stretchy again.

Cracks when removing fun & fancy from the window

What could be the reason for the Marabu fun & fancy clings tearing when they are removed from the window?

It mainly has to be ensured to use enough paint and to extend the paint all the way to the outlines. It is important not to remove the designs from the film before the end of the 24 hour drying period. As the designs adapt to the ambient temperature, they should not be placed or removed during extreme heat or cold. When it is cold, the clings should be warmed up before carefully removing them, e.g. with your hand, a warm damp cloth or a hair dryer (caution!). To improve durability, the clings can also be applied to an adhesive film which will enable you to remove them without problems at any temperature.